#head #sander
https://www.keyingabrasives.com/products/non-woven-flap-wheel/ ↗


Spiral Band Holder
KEYING Rubber drum holders is matched with spiral band sizes, well-suited to the cooperating speed and contact pressure with the abrasive spiral bands. Bulk buy more custom selection of abrasive products from Keying abrasive tools factory.

Spiral Holder
Raw Material

Rubber drum holders

Max. RPM

5000~55000 RPM

Types Of Spiral Band Holders

Spiral Band Rubber Drum Holders
Rubber drum holders are matched with spiral band sizes,well-suited to the cooperating speed and contact pressure with the abrasive spiral bands.

Working Principle of Spiral Band Holders
Reducing wear and thermal load of the workpiece can be achieved by reducing contact pressure and speed (abrasive paste/oil can be used when appropriate)

In order to avoid unnecessary tool wear and thermal load, choose to switch to coarser-grit abrasive clothes instead of increasing contact pressure to increase cutting force

increasing the cutting speed achieves a slightly finer surface.

Increasing the contact pressure makes the surface slightly more coarse and if you use the same grit size on soft or hard material the surface finish will look coarse on the softer material.

With high elasticity, good synchronous consumption, suitable for a variety of planes, curved surfaces, and corner polishing

If you want to know more types of flap sanding wheel for bench grinder, please visit our website.