Waterproofing buildings is the process of forming a barrier over the surfaces of foundations, roofs, walls, and other structural members of a building to prevent water penetration through these surfaces. To summarize, building surfaces are made water-resistant and waterproof.
According to research, waterproofing only accounts for 1% of a building's construction costs, but when ignored, it can account for nearly 90% of the damage. However, keep in mind that not all waterproofing chemicals are suitable for all applications. As a result, you must ensure that you obtain the appropriate types of waterproofing materials for your specific needs. The five types of waterproofing in construction are listed below to aid you in your decision-making process:
1. Cementitious Waterproofing – Cementitious waterproofing products are widely regarded as the most user-friendly waterproofing materials. These are widely available from masonry product suppliers such as MCT UAE, and they are simple to mix and apply. Cementitious waterproofing materials are breathable, seamless coatings used to provide positive and negative side waterproofing protection on concrete and masonry surfaces. Corroprufe FCW is one of Organix Building System's most popular cementitious waterproofing products. It is a two-component cementitious coating made up of pre-weighed polymer modified powder and liquid components. It is commonly used to waterproof concrete in internal or external applications such as potable and stormwater tanks, reservoirs, swimming pools, and wet areas in kitchens, showers, and bathrooms below screed and tile finishes.
2. Bituminous Coating Waterproofing – Bituminous coating is also known as asphalt coating. It is a type of coating that, depending on its formulation and polymerization grade, is used for waterproofing and as a flexible protective coat. Wet areas beneath screed are among the most common applications for bituminous waterproofing.
3. Bituminous Membrane Waterproofing Method – According to UAE construction chemicals companies, bituminous membrane waterproofing is a popular method used for low-sloped roofs due to its proven performance. Bituminous waterproofing membranes have a torch on the membrane and a self-adhesive waterproofing membrane.
4. Polyurethane Membrane Waterproofing – The polyurethane liquid membrane method of Waterproofing manufacture is typically used for flat roof areas that are exposed to weathering. This type of waterproofing material is extremely sensitive to moisture levels. As a result, before application, it is critical to be extra cautious in evaluating the moisture content of the concrete slab; otherwise, peeling or de-bonding of membranes may occur after some time.
5. Liquid Waterproofing Membrane Method – A liquid membrane is a thin coating that typically consists of a primer coat and two coats of topcoats applied by spray, roller, or trowel. It is more adaptable than cementitious waterproofing.
At the end of the day, there are numerous distinct types of waterproofing materials on the market. Some are more effective than others. With this in mind, it is critical to understand that they are not all created equal. As a result, you must spend some time determining which one will work best for your specific project requirements.
If you are looking for a specific waterproofing product, Organix Building System offers a variety of Corrotech cementitious waterproofing chemicals and other types of EPDM waterproofing for your project.
