How Do You Change The Oil Filter?

The issue of how to change an oil filter can be crucial in case you don't want to run to an auto mechanic with every small issue you face. It's easy and will reduce time and cost. In addition, it may take longer to bring your vehicle to the mechanic. Also, changing an oil filter could cost anything between $25 and $70 if synthetic oil is utilized. Fortunately, the process is simple and easy to learn.

Choosing The Right Oil Filter Wrench
In order to have a successful job, it is crucial to correctly take off the filter from your oil. Before you start making sure that you have an oil filter wrench that fits perfectly with the vehicle you are using. You can use an abrasive chain, strap wrench, or sleeve-type tool to remove traditional spin-on canister filters. If you are in a pinch, you can just use a large screwdriver to poke through the shell's outer layer and make the filter spin.

If your car has the paper-filter in a housing that is cartridge-style or made of plastic, you will need the socket wrench. The sizes vary from one manufacturer to the next, so be sure to get the correct size for your vehicle. (For instance the2009 Toyota Corolla uses a 64 millimeter filter wrench, with 14 Hex points.)

The main purpose of the wrench is to provide increased speed and efficiency because most oil filters can't be removed by hand because of the thin layer of grease and oil that they are coated with.

It Is Crucial To Change The Oil
Regular oil changes are vital to ensure smooth operation and a long engine life.

There are some tips to help you change your oil more easily and less messy. However, be sure to follow these steps for draining the oil before removing your filter:

Before changing the oil, run the engine for a couple of minutes. This will ensure that any contaminants do not stick to the pan or oil pump.

To remove the oil filter and drain it, you must locate the oil plug. Place your drain pan under it and let it collect the oil. Utilize your repair or owner's manual to locate and identify the component, and then use a wrench to loosen it.

It is possible to remove the plug by removing it using your hand. However, make sure that you place the pan properly so that the oil does not drain in an angle.

When all the oil is draining, replace the plug. Begin the threads manually and then tighten it using the wrench.askingasking2expertcould be damaged if you overtighten the bolts.

Remove And Replace The Old Filter
Now you are ready to remove the old oil filter and place the new one in its place.

Use the oil filter wrench to loosen the filter. Allow the oil to be drained from the filter prior to removing it.
After you have removed the oil from your filter, you can make use of an oil filter wrench or hands to remove it. Gloves are useful here, not only to keep the dirt off of your skin but also to protect your hands from the oil and filter that can be extremely hot.

Make sure that the surface on which the engine is mounted is clean with an abrasive. This is a crucial step that also ensures the old gasket wasn't remaining after removal of the filter.

Then, you'll need to take the new oil filter, lubricate it by coating the seal with fresh oil. The new filter must be filled with around 1/2 quart oil to ensure it's ready to use when the engine turns on.

Make sure the filter is completely tightened. You should not overtighten your new filter. The gasket's thick rubber is prone to deformation in the event that it is tightened too tightly. This could lead to an leak.

Spray In New Oil And Start It Rooting
Make use of a funnel that is clean to pour the oil. After the oil has dried, replace the cap. Refer to your repair or owner's manual for the correct level of oil and the amount.

Next, run the engine for couple of minutes to check for leaks. If you spot a leak, turn the engine off immediately, and then try to determine the source of the leak. from. If all goes as expected then the filter should be in place and there should be no leakage.

Simply check the level of oil another time to ensure it's in the green. To avoid costly repairs or malfunctions later on, know how to change your oil filter.