Precision Fiber Cleaver

#sc #sm #connector

https://www.phxfiber.com/products/precision-fiber-cleaver.html ↗


Precision Fiber Cleavers
Using Precision Cleaver, please be cautious of the following particulars and prevent your body and property from harm and use carefully and usefully. Keep Precision Cleaver away from water. Place fiber precision cleaver away from the humid and dusty place. High temperature causes transforming, so keep it at a normal temperature. Be careful with a serious impact on it. To change to Multimode, use the wrench enclosed with the product to change a holder. Make sure that you fasten with the bolts properly.

Specifications of Precision Fiber Cleaver
On the edge of the blade, the cleaving position from 1~12 is marked.
When it does not leave the fiber normally, clean the cleaving edge part, and rubber pad with alcohol-soaked cotton. (But, when cleaning rubber pad, do not use acetone or solvent)
And if it still does not leave, it means the cleaving edge is fully used, operators are required to change the cleaving position by the following order.
Cleaving Position Adjustment 1. Open the cover and make the blade carriage come out to the front of the body and hold it tight with your hands.
2. Release 2 set screws (1st setscrew location: left of CAM, 2nd setscrew: backside of blade carriage).
3. Rotate the blade counter-clockwise. The blade is originally fixed on "position 1". Treat the blade with care not to touch the tip of the blade.
4. Take the reverse order. (Fasten the setscrew with equal strength)

Now the high precision fiber cleaver price is reasonable, if you have needs to buy high precision optical fiber cleaver, please contact us.

As one of fiber optic equipment manufacturers, we will do our best to meet all the needs of customers.