#handheld #capnography <br>[a]https%3A%2F%2Fwww.capno-med.com%2Fproducts%2Fhandheld-capnography-monitor%2F[/a] <br> <br> <br>Handheld Capnography Monitor <br>Lightweight and portable, work independently; <br> <br>Lower power consumption, longer working time; <br> <br>Using imported electronic components, it has the advantages of accurate numerical value and stable waveform. <br>Specification of Handheld Capnography Monitor <br>Project Parameter Description <br>Range EtCO2&amp; FiCO2：0-99 mmHg,0-9.9 kPa,0-10% <br> SpO2：0-100% <br> TEMP：25 to 45C <br> RR：3-99 rpm <br> PR：20-300 bpm <br>Accuracy EtCO2 &amp; FiCO2：0-40 mmHg ±2 mmHg; 41-99 mmHg ±6% of reading <br> 0-5.3 kPa ±0.3 kPa: 5.4-9.9 kPa ±6% of reading <br> SpO2：±2%(70-100%) <br> TEMP：±0.2C <br> RR：±1rpm <br> PR：±1bpm <br>Operating ENVIRONMENTAL 0 to 40 C,10-95% RH,(non-condensing), 70-120 kPa <br>Storage ENVIRONMENTAL -20 to 70 C,10-95% RH,(non-condensing),50-120 kPa <br>DISPLAY Colour LED,262kk colours, 3.5inch,320(RGB)x480 <br>Power Type Power Supply or Built-in lithium battery (3500mAh） <br>Battery Life 6 hours (Full load: EtCO2 &amp; SpO2 &amp; TEMP) <br>Power Supply 90-260VAC/5VDC,50-60Hz <br>Dimensions 5.9 x 2.7 x 1.1 in (148x68x27 mm) <br>Weight 9.5 oz (270 g) (Built-in lithium battery) <br> <br>Details of Handheld Capnography Monitor <br>Quick Details of Handheld Capnography Monitor for Sale <br>Real-time monitoring of the patient’s EtCO2 waveform, EtCO2 value, respiratory rate (RR), SpO2 value, pulse rate (PR), and body temperature. Real-time monitoring data is recorded and exported as a basis for diagnosis. We offer a variety of configurations, along with related accessories and consumables, to suit different needs.

#end #tidal #co2 #meter <br>[a]https%3A%2F%2Fwww.capno-med.com%2Fproducts%2Fetco2-monitor%2F[/a] <br> <br> <br>What Is a EtCO2 Monitor? <br>The understanding EtCO2 monitor tracks exhaled carbon dioxide levels, crucial for assessing ventilation and circulation during medical procedures. Vital for surgeries, ICUs, and emergencies to ensure patient well-being. <br> <br>Types of Continuous EtCO2 Monitoring Devices <br>MEMO Portable Capnograph Monitors <br>Compact device for real-time transcutaneous end tidal co2 monitoring during procedures, ensuring patient safety. <br> <br>Handheld Capnogard EtCO2 Monitors <br>Portable device for convenient real-time monitoring of exhaled carbon dioxide levels, vital for medical procedures. <br> <br>Capnography Monitoring System <br>Comprehensive solution for continuous CO2 monitoring, essential for assessing ventilation and patient condition during medical interventions. <br> <br>Desktop Capnograph Monitor <br>Stationary device for precise measurement of exhaled CO2 levels, aiding in ventilation assessment during medical procedures. <br> <br>Multi-parameter Patient Monitor <br>Comprehensive device for tracking vital signs, including ECG, SpO2, EtCO2, and more, ensuring comprehensive patient care. <br> <br>Function of EtCO2 Monitor <br>Surgery Procedures Of Purpose of EtCO2 Monitoring <br>The EtCO2 monitor measures the concentration of carbon dioxide at the end of exhalation. This information helps healthcare providers assess the patient&#039;s ventilation status, ensuring that the patient is effectively exhaling carbon dioxide and receiving an adequate supply of oxygen. Abnormal EtCO2 levels can indicate issues like hypoventilation or airway obstruction, enabling timely intervention. <br> <br>VENTILATION ASSESSMENT <br>Surgery Procedures Of Function of EtCO2 Monitor <br>EtCO2 levels also offer insights into a patient&#039;s circulation. Sudden changes in EtCO2 can indicate alterations in cardiac output or blood flow. For instance, during CPR, a rise in EtCO2 might suggest improved circulation. This monitoring is crucial in critical care settings, surgeries, and emergency situations to promptly address any changes in the patient&#039;s respiratory and circulatory conditions. <br> <br>CIRCULATION MONITORING <br>FAQs of EtCO2 Monitor <br> <br>What is an EtCO2 monitor? <br> <br>An EtCO2 monitor is a medical device that measures the concentration of carbon dioxide in a patient&#039;s exhaled breath, providing insights into their respiratory and circulatory status. <br> <br>Why is EtCO2 monitoring important? <br> <br>EtCO2 monitoring helps healthcare professionals assess ventilation efficiency, detect respiratory issues, and monitor changes in circulation, making it crucial during surgeries, intensive care, and emergencies. <br> <br>What information does the capnogram waveform provide? <br> <br>The capnogram waveform displays different phases of exhalation, aiding in detecting airway obstructions, assessing ventilation efficiency, and observing changes in CO2 levels. <br> <br>How can healthcare providers respond to abnormal EtCO2 readings? <br> <br>Healthcare providers can adjust ventilation parameters, administer appropriate treatments, or take necessary actions based on the specific condition causing the abnormal EtCO2 values. <br> <br>Now the price of end tidal co2 monitor for sale is reasonable, anything you need, please contact us. <br>Qinhuangdao Kapunuomaite Medical Equipment S&amp;T Co., Ltd (Capnomed Medical) established in 2016. It focuses on the R&amp;D and manufacturing of EtCO2 technology and EtCO2 consumables.

#co2 #airway #adapter <br>[a]https%3A%2F%2Fwww.capno-med.com%2Fproducts%2Fdisposable-etco2-airway-adapter%2F[/a] <br> <br> <br>Disposable Et CO2 Airway Adapter <br>Exquisite design, small dead space; <br> <br>Precise size, tight connection; <br> <br>Made of medical grade material, safe and reliable; <br> <br>Strong compatibility; <br> <br>Specification of Disposable Airway Adapter <br>Project Specifications <br>Principle of Operation Connected to the gas path, make the EtCO2 Sensor to measure the gas passing through it. <br>Product Type Accessories(Used with EtCO2 Sensor). <br>Initialization Time Immediately after accessing the gas path. <br>Patient Type Adult &amp; Pediatric. <br>Patient Use Style Single-patient-use. <br>Service Life Single patient use only (Or continuous use for more than 6 hours). <br>Minimum Shelf Life 2 Years. <br>Temperature Operating: 0 to 40°C; Storage: -40 to 70°C; Transport: -40 to 70°C. <br>Humidity Operating: 10 to 90% RH, non-condensing; Storage: 10 to 90% RH, non-condensing. Transport: 10 to 90% RH, non-condensing. <br>Atmospheric Pressure Operating: 400-800 mmHg; Storage: 400-800 mmHg; Transport: 400-800 mmHg. <br>Sterile OR Non-Sterile Non-Sterile. <br>Latex Free Not manufactured with natural rubber latex <br>Dead Space ≤6CC. <br>Weight &lt;10g. <br>Size Deepth*Wideth*Highth: 57mm*22mm*28mm. <br> <br>Details of Disposable Airway Adapter <br>Quick Details of Disposable Airway Adapter <br>Adaptable to mainstream EtCO2 sensor access to the main gas path, it accurately and swiftly collects end-tidal carbon dioxide values. This is a disposable consumable. Two models are available for adults/children (CSM01A) and infants (CSM01B) to cater to different patient types <br>Applications of Disposable EtCO2 Airway Adapter <br> <br>Anesthesia Monitoring: During anesthesia administration, monitoring EtCO2 levels is essential to ensure proper ventilation and assess the patient&#039;s respiratory status. Disposable etco2 adaptor facilitate the connection between the patient&#039;s airway and the capnography monitoring system, allowing continuous monitoring of exhaled CO2 levels throughout the surgical procedure. <br> <br>Intensive Care Unit (ICU) Monitoring: In ICU settings, continuous monitoring of EtCO2 is vital for patients on mechanical ventilation or those with compromised respiratory function. Disposable EtCO2 airway adapters enable secure attachment to the endotracheal tube or tracheostomy tube, allowing accurate monitoring of EtCO2 levels in critically ill patients. <br> <br>Emergency Medicine: During emergency medical interventions such as cardiopulmonary resuscitation (CPR) or airway management, disposable EtCO2 airway adapters facilitate rapid connection to the capnography monitor. Monitoring EtCO2 levels in real-time helps assess the effectiveness of ventilation and guide treatment decisions in emergent situations. <br> <br>Pediatric Care: Disposable EtCO2 airway adapters are available in pediatric sizes, making them suitable for use in monitoring EtCO2 levels in infants and children. They ensure a secure and appropriate connection to the patient&#039;s airway, allowing accurate assessment of respiratory function in pediatric patients undergoing anesthesia, critical care, or emergency procedures. <br> <br>Transportation and Mobile Care: In settings where patients require transportation, such as ambulances or air medical transport, disposable EtCO2 airway adapters facilitate continuous monitoring of EtCO2 levels during transit. Their disposable nature ensures convenience and hygiene, making them ideal for use in mobile healthcare settings. <br> <br>Procedural Sedation: During procedures requiring sedation or analgesia, monitoring EtCO2 levels helps ensure patient safety by detecting hypoventilation or respiratory depression. Disposable airway adapter co2 enable easy connection to nasal cannulas or facemasks, allowing continuous monitoring of exhaled CO2 levels during procedural sedation in outpatient or inpatient settings. <br> <br>Respiratory Therapy: In patients undergoing respiratory therapy, such as non-invasive ventilation or high-flow nasal cannula therapy, disposable EtCO2 airway adapters can be used to monitor respiratory status and gas exchange. They facilitate the connection between the patient interface device and the capnography monitor, enabling real-time monitoring of EtCO2 levels during therapy. <br>Qinhuangdao Kapunuomaite Medical Equipment S&amp;T Co., Ltd (Capnomed Medical) established in 2016. It focuses on the R&amp;D and manufacturing of EtCO2 technology and EtCO2 consumables. <br> <br>In 2019, it passed ISO 13485 and CE certification, and its products cover EtCO2 monitoring, breath sampling, HFNC, rehabilitation consumables, etc. At the same time, it has domestic and international registration certification and main market access qualifications, providing professional, fast and reliable services for users from all over the world.

#sidestream #capnography <br>Face Mask Ventilation <br>Elaborate Design <br> <br>Ultra Quiet <br> <br>Good Fit <br> <br>Super Safe <br> <br>Specification of Ventilator Oxygen Mask <br>Size/Model H(mm) W(mm) L(mm) <br>Large 115 91 120 <br>Medium 115 90 119.5 <br>Small 115 89 118 <br>Daily Cleaning The headgear needs to be removed when cleaning the mask daily. <br> Wash the mask in warm soap water. Please air dry it after wash. <br>Weekly Cleaning Soak the headgear in warm soap water for 10 minutes and then handwash. Please air dry it and avoid direct sunlight. <br> <br>Details of Ventilation Therapy Mask <br>Quick Details of Ventilation Therapy Mask <br>Elaborate Design <br> <br>Good seal <br> <br>Wide vision <br> <br>Minimal contact <br> <br>Ultra Quiet <br> <br>Low noise <br> <br>360°exhaust0 <br> <br>Cellular vented holes <br> <br>Good Fit <br> <br>Maximum compatibility <br> <br>Soft silicone cushion <br> <br>Comfortable for <br> <br>long-time use <br> <br>Super Safe <br> <br>Bioc test passed <br> <br>Medical-grade silicone <br> <br>Suitable for sensitive skin <br> <br>Fitting Guide <br> <br>Put the upper ends of the headgear into the fitting holes and attach them well. <br> <br>Place the mask on the face and extend the headgear to the back of the head. Please confirm that the headgear is fully fitted. <br> <br>Put the lower- half straps beneath the ear and insert the clips into the hook on the lower part of the mask frame. <br> <br>Extend the upper-halt straps of the headgear as shown in the above figure until the mask is fixed properly. <br> <br>Repeat the process for the lower-half of the headgear as shown in the above figure until the task is fixed properly. <br> <br>Connect the air tubing to the swivel. Then turn on the device and adjust the mask to the right position and make sure no air leak. <br> <br>Product Life <br> <br>The expected service life of the FM50 Full Face Mask is 6 months. <br> <br>if the mask is broken or deteriorated during use, please replace it with a new one. <br> <br>As one of oxygen masks suppliers, we can provide kinds of ventilation mask for sale , and the ventilation mask price is reasonable, if you want to buy different ventilation mask types, please contact us. <br> <br>Now the price of capnography monitor for sale is affordable, anything you need, please leave us a message. <br> <br>[a]https%3A%2F%2Fwww.capno-med.com%2Fproducts%2Fventilation-therapy-mask%2F[/a]

#sampling #line <br>SpO2 Sensor <br>The spo2 sensor cable is a crucial medical device used to measure the oxygen saturation level in a patient’s blood. It’s non-invasive, attaching comfortably to a fingertip, earlobe, or foot to provide accurate, real-time readings. This sensor is essential in various medical scenarios, including surgery, anesthesia, and patient monitoring in critical care. Its compact and lightweight design makes it highly portable, and it’s designed for patient comfort during prolonged use. <br> <br>Details of SpO2 Sensor <br>Quick Details of SpO2 Sensor <br>The SpO2 Sensor is a vital tool in healthcare, providing real-time, accurate measurements of a patient’s blood oxygen saturation levels. Its non-invasive nature ensures patient comfort, while its compact and lightweight design allows for easy portability. The sensor is particularly crucial in critical care, surgery, and anesthesia, where continuous monitoring is essential. It’s designed for prolonged use, ensuring reliable readings over time. Additionally, the SpO2 Sensor is user-friendly, making it easy for healthcare professionals to operate and interpret results, thereby enhancing patient care and management. <br> <br>Now the price of pulse ox cable is reasonable, if you have needs to buy pulse oximeter cables, please contact us. <br> <br>Capnomed can provide customers with professional OEM/ODM services. This includes but is not limited to: packaging, appearance, functionality, performance, lifespan, and new product development. <br> <br>[a]https%3A%2F%2Fwww.capno-med.com%2Fproducts%2Fspo2-sensor%2F[/a]

#etco2 #tube <br>Sidestream EtCO2 sensors are used to measure the carbon dioxide (CO2) levels in a patient&#039;s breath during anesthesia or ventilation procedures. These sensors are located separate from the patient&#039;s airway and are connected to the breathing circuit through a sampling tube. They draw a small sample of the patient&#039;s exhaled breath away from the airway and analyze it to determine the CO2 concentration. <br> <br>Sidestream sensors provide continuous monitoring of CO2 levels, allowing healthcare professionals to assess ventilation effectiveness and the patient&#039;s respiratory status, commonly used in critical care units and during procedures where endotracheal intubation is not required. <br> <br>Types of Sidestream ETCO2 Sensors <br>Sidestream Capnography Sensor <br>It can be used with monitors and ventilators with carbon dioxide function to accurately and quickly collect end-tidal carbon dioxide values and generate visual curves. Both reusable and single-use product consumables are available. <br> <br>Capnography Water Filter <br>The sidestream co2 module sensor is adapted to be connected to the gas circuit, which can effectively purify the sampled gas, so that the sidestream end tidal co2 monitoring sensor can accurately and quickly collect the value of end-tidal carbon dioxide and protect the gas circuit. Single use consumables. <br> <br>Sampling Line <br>A sampling line is a component of medical devices used to collect and transport samples of gases or fluids for analysis or measurement. It is commonly used in various clinical settings, including anesthesia, respiratory therapy, and critical care. <br> <br>L-Type EtCO2 ConnectorThe &quot;L-shaped connector&quot; is adapted to the &quot;sampling tube&quot; to connect to the air circuit, so that the side-stream EtCO2 sensor can accurately and quickly collect the value of end-tidal carbon dioxide. Single use consumables. <br>L-Type EtCO2 Connector <br> <br>How does Sidestream EtCO2 Sensor Work? <br> <br>Sidestream EtCO2 sensors work by using a sampling tube to draw a small sample of exhaled gas from the patient&#039;s airway. This sample is then transported to the sensor for analysis and measurement of carbon dioxide levels. The sampling tube is connected to the patient&#039;s airway through an adapter or cannula. A small pump or vacuum within the capnography system helps to draw the gas sample through the tube to the sensor. Once the sample reaches the sensor, it analyzes the carbon dioxide concentration and provides the EtCO2 reading. <br> <br>Sidestream capnography requires a small amount of gas flow to be diverted from the patient&#039;s airway, leading to a slight delay in measurement compared to mainstream capnography. <br> <br>FAQs of Sidestream EtCO2 Sensors <br> <br>What is sidestream EtCO2? <br> <br>Sidestream EtCO2 refers to the measurement of end-tidal carbon dioxide levels by sampling a small portion of exhaled gas through a sampling tube located away from the patient&#039;s airway. <br> <br>What is the flow rate of sidestream capnography? <br> <br>Typically, the flow rate of sidestream capnography is around 50-200 milliliters per minute (mL/min). <br> <br>What are the advantages of sidestream capnography? <br> <br>Non-intrusive and less uncomfortable for patients compared to mainstream capnography. <br> <br>Provides flexibility in terms of sensor placement and can be used with various airway adapters. <br> <br>Can be used in a wide range of clinical settings and patient populations. <br> <br>Offers reliable and accurate measurements of end-tidal carbon dioxide levels. <br> <br>Allows for continuous monitoring of ventilation and respiratory function. <br> <br>If you want to know more about sidestream etco2 detection, please visit our website. <br> <br>Now the price of capnometer for sale is reasonable, anything you need, please contact us. <br> <br>[a]https%3A%2F%2Fwww.capno-med.com%2Fproducts%2Fsidestream-etco2-sensors%2F[/a]

#capnography# line <br>Mainstream Sidestream Capnography Sensor <br>Complete model: Compatible with equipment from many well-known manufacturers around the world, with wide compatibility; <br> <br>Using medical TPU plastic and low impedance wire: It has the advantages of good texture, bending resistance, corrosion resistance, and stable waveform; <br> <br>Gold-plated nickel-plated equipment end connection hardware and electrode surface: Excellent electrical conductivity, ensuring full contact and reliable connection; <br> <br>Using imported electronic components: It has the advantages of accurate value and stable waveform. <br> <br>Specification of Side Stream Capnography Sensor <br>Project Specifications <br>Principle of Operation Non-dispersive infrared(NDIR) single beam optics, dual wavelength, no moving parts. <br>Initialization Time Capnogram displayed in less than 3 seconds, full specifications within 3 minutes(At 25°C) <br>CO2 Measurement Range 0 - 114 mmHg; 0 - 15 %; 0 - 15.2 kPa <br>CO2 Rise Time Rise Time Less than 80 ms <br>CO2 Resolution 0.1mmHg 0 to 38 mmHg. <br> 0.25 mmHg 39 to 114mmHg. <br>CO2 Accuracy 0 - 40mmHg ±2 mmHg. <br> 41 - 76mmHg ±5% of reading. <br> 77 - 114 mmHg ±8% of reading. <br> Above 80 breaths per minute ±12% of reading. <br> * Note: Gas temperature at 25°C. <br>CO2 Stability Short term drift: Drift over four hours shall not exceed 1 mmHg maximum. <br> Long term drift: Accuracy specification will be maintained over a 120-hour period. <br>Sampling Frequency 100Hz。 <br>Respiration Rate Range 3 to 150 breaths per minute. <br>Respiration Rate Accuracy ±1 breath. <br>Temperature Operating: 0 to 40°C; Storage: -40 to 70°C; Transport: -40 to 70°C. <br>Humidity Operating: 10 to 90% RH, non-condensing; Storage: 10 to 90% RH, non-condensing. Transport: 10 to 90% RH, non-condensing. <br>Atmospheric Pressure Operating: 400-800 mmHg; Storage: 400-800 mmHg; Transport: 400-800 mmHg. <br>Water Resistance IPX4 - Splash-proof - Sensor only. <br>Sensor Weight &lt;250g <br>Sensor Size Deep*Wide*High: 102mm*62mm*38mm <br>Cable Length 0.75m <br> <br>Details of Sidestream Capnography Sensor <br>Quick Details of Sidestream Capnography Sensor <br>Designed for use with monitors and ventilators equipped with a carbon dioxide function, it accurately and swiftly collects end-tidal carbon dioxide values and generates visual curves. Both reusable and disposable consumables are available. <br> <br>If you want to know more kinds of sidestream capnometer, please visit our website. <br> <br>Now the price of capnography monitor for sale is reasonable, anything you need, please contact us. <br> <br>[a]https%3A%2F%2Fwww.capno-med.com%2Fproducts%2Fsidestream-capnography-sensor%2F[/a]