Our electrical cabinet panel coolers are a simple, reliable and inexpensive method to cool and climatize all types of electrical panels and enclosures. The Supreme Air Electrical Panel Cooler is an efficient pneumatic product designed to separate regular compressed air into hot and cold air streams. The coolers require only compressed air to work, so there is no need for harmful refrigerants and freon gas. They offer the ideal solution to cooling many types of enclosures and electrical cabinets with large cooling capacities up to 7200 BTUs.
How does a Cabinet Cooler work?
Through a standard knockout hole, the cooler is mounted vertically to the top of a cabinet. A locking ring provided with the cooler locks it into place.
A compressed air line hooks up to the cooler by threading a 1/4 NPT fitting to the air inlet.
As compressed air enters the cooler, the integrated vortex tube separates the air into hot and cold air streams.
The vortex tube's hot steam is emitted into the atmosphere through a muffler, which produces low levels of noise.
Through an outlet tube at the bottom, cold air is drawn into the cabinet.
The cold stream entering the electrical cabinet causes the hot air inside to rise, which is then purged through the cooler.
We also offer an optional cold air distribution kit which connects to the cooler's outlet tube and allows the user to direct the cold stream to specific hot spots within the cabinet. Supreme Air Products' electrical panel coolers have been made of stainless steel for durability.
Cabinet Cooler Specifications
Mounting:
Supreme Air Products(tm) Cabinet Cooler must be vertically mounted on a flat surface for all enclosure types. A 1-1/8" diameter hole or electrical knockout can be used to mount an electrical cabinet cooler unit. The locking ring holds it in place. We offer additional side mount kits for instances where coolers cannot be mounted on the top of the cabinet due to height restrictions.
Humidity:
It is crucial to seal off all openings and vents that could allow in ambient air, particularly in hot or humid environments. The relative humidity inside the enclosure stabilizes at 45% for all continuously operating Cabinet Coolers
Filtration:
Clean filtered air should be used on all lines that power the Cabinet Cooler. A 5 micron auto drain filter is recommended. To prevent accidental water from entering the enclosure, it is important to filter properly. Use an oil filter that has a minimum of 0.3 micron rating if oil is found in compressed air.
Environmental Considerations
NEMA 4/4X (IP56) - Designed for Electrical Control Panels - Splash resistant, oil-tight, and dust-proof for use in wash down environments as well as outdoor use. Coolers are constructed of Stainless Steel (Type 304) for longevity in wet environments.
NEMA 12 (IP52) - Cabinet Coolers (oil-tight, dust-proof) are used in industrial environments where no liquids can come into contact with the unit. To withstand extreme corrosive environments, coolers are made of Type 304 Stainless Steel.
For more details about cabinet cooler go to see our website
