The cost of the biomass pellet production line is identified by the raw materials utilized. As an example, if the raw products are branches and also trunks with high wetness web content, they should be broken - crushed - dried out - granulated - stuffed - delivered. It mainly depends upon what resources are used. 350 kind biomass pellet device tools 38,000, version: 350 kind 300 ~ 500 kg per hr, 450 type 500 ~ 800 kg, 560 type 1 ~ 1.5 loads, 600 kind 2 tons, 850 kind 3 ~ 4 loads.
Related post: biomass processing plant
The excellent selling in Indonesia totally biomass pellet production line price relies on your resources and also outcome size. First off, you require to recognize what your resources are. The raw materials are ready-made sawdust or timber chips as well as the moisture web content of the products is 10%-15%. A manufacturing facility offered new technology wood pellet device is enough. If your basic materials are unrefined logs, branches, etc need to be pulverized by a timber chipper and biomass crusher, then dried out in a dryer (if the wetness goes beyond 15%, it needs to be dried out), then the major device is granulated, and then the product packaging machine loads this collection of assembly line.
Understanding your raw materials is about the outcome. The outcome of the biomass pellet mill maker is various and also the design is various, so the rate is also various. The biomass pellet production line price is not just a matter of reporting a number, yet it is required to create a strategy as well as quote according to your needs.
Related post: biomass pellet plant for sale Indonesia
Firstly, the raw material moisture requirements of timber pellets are very stringent. The wetness content of the product is expensive, which obstructs the die holes, to make sure that the bits can not be generated; if the wetness web content of the product is as well reduced, if it is too dry, it is difficult to create, and the viscosity is not nearly enough.
Related post: wood pellet making machine price
Generally 12%-13%, 15-20% of the raw product moisture after modulation is the standard for pushing wood pellets. If the raw product moisture is too high, the mold and mildew resistance and slipping sensation will happen after the raw material enters the biomass pelletizer ring die; pay attention to manage the moisture web content of the raw material prior to going into the biomass pelleting maker, If the water web content is expensive, there will be slippage in the ring die, resulting in the phenomenon that it is not easy to release.
Related post: biomass pellet mill for sale
If your raw material wetness satisfies the demands, a biomass timber pellet press maker can create timber pellets. If it does not satisfy the demands, it needs to be dried, so it needs to be geared up with a wood dryer and also a hot blast cooktop. Certainly this is if your basic material is wood chips. If your resources is timber chips (thickness less than 0.5 mm), it needs to be shattered, which amounts including one more process. Some customers' resources are bark, which is also feasible after including a wood pulverizer.
Nevertheless, some consumers' raw materials are timber scraps, due to the fact that the cost of timber scraps is cheap and very easy to buy, so there are numerous instances, after that it is required to add a wood chipper, first to cut the non-standard timber scraps into wood chips, and afterwards most likely to squash.
Related post: 5T/H wood pellet manufacturing factory in Austria
For some consumers whose raw materials are waste structure layouts, it is essential to change the wood chipper to a bamboo plywood crusher.
Since the bamboo plywood itself has numerous iron nails, it is very easy to damage the blade on the timber chipper when utilizing a wood chipper. One more factor is that the waste structure design template is relatively vast, and also the feed port of the wood chipper is typically 1250px.
Related post: https://www.pellet-richi.com/wood-pellet-machine/biomass-pellet-production-line.html
It is impossible to manually break it in advance, right? The bamboo plywood crusher can go into any bamboo plywood with a feed opening of less than 1.25 m, and the gnawing knife of the bamboo plywood crusher is an ingot blade, as well as the iron nails have little impact on him.
Unlike timber chippers, the blades are quickly damaged. Bamboo plywood is additionally an benefit of making wood pellets. Generally, its moisture content is really little, in between 15-20%. For that reason, using bamboo plywood as pellets conserves the trouble of wood drying machines.
For details please contact: Richi Machinery
WhatsApp：86 138 3838 9622
Email：[email protected]
