Aluminum grating for trailers | Huawei

The trailer plate adopts 1060 and 3003 aluminum grid plate to achieve anti-skid effect. The trailer board adopts 2-8mm thick non-slip square aluminum plate to make your transportation safer. The coefficient of friction increases, and the friction adhesion is about 2 to 3 times larger than that of ordinary flat aluminum plates. The design and manufacturing process of the aluminum sheet metal 4x8 loading table not only reduces the weight of the vehicle, but also increases the lifting and loading capacity, and also increases the anti-skid function, which is beautiful and practical.
The invention has the characteristics of anti-slip, anti-rust, anti-corrosion, durable and beautiful. If the aluminum checkered plate is used for anti-skid effect, its basic pattern needs to be processed to increase the roughness of its basic pattern, which will increase the basic friction of the aluminum checkered plate, and carry out various anti-skid of the plate continuously, because it is necessary to The pattern and surface treatment of checkered plate aluminum to increase the roughness of its surface is the basic reason and key factor for anti-skid.
Classification and characteristics of aluminum gratings for trailers;
1. Normal plate:
Ordinary panels generally refer to ordinary 1000 series aluminum grid panels. Generally, the mechanical strength of the plate is low (softer), and it is easy to dent and deform, and the corrosion resistance and wear resistance are poor. However, the general plate has good welding performance and is not easy to crack. In order to ensure that the trailer board does not suffer from serious dent deformation, the thickness of the aluminum grid board of the trailer is usually 2.0 mm or more.
2. Manganese plate:
The manganese plate is the 3003 Aluminum grid plate in the 3000 series aluminum manganese magnesium alloy. The strength, wear resistance and corrosion resistance of 3003 aluminum grid plate are better than ordinary plates. The welding performance is similar to that of ordinary steel plates. The thickness of the manganese plate floor of the semi-trailer is usually more than 1.8mm.