A Guide on How to Check Your Tire Pressure
Maintaining proper tire pressure is essential for the overall performance of the tires of your vehicles. Driving with improperly inflated tires, i.e., if the air pressure inside the tires is more or less than the recommended level, increases the risk of wear and tears and tire failure. Overinflated or underinflated tires also provide lower gas mileage and can negatively impact your car’s integrity.To get more news about austone tires price, you can visit gofortunetire.com official website.
On the other hand, an adequately inflated tire ensures longer life, rapid steering response, and better fuel efficiency. To ensure your vehicle is running on properly inflated tires, you should check tire pressure regularly, preferably every month.
How to know the recommended tire pressure for your vehicle?
Different vehicles have different types of tires. The recommended tire pressure might vary depending on the vehicle you own. Usually, the recommended tire pressure for your vehicle can be found written on a sticker inside the driver's door. You can also find it in the vehicle's user manual.
In addition, you will notice tire pressure written on the sidewalls of the tires. That is the maximum permitted tire pressure. However, you should try to maintain the tire pressure listed in the door sticker or user manual.
How to check your tire pressure?
A. Start with cold tires.
According to experts, you should check tire pressure when the tires are cold. Tires are deemed to be cold when the vehicle has been parked for more than three hours or driven for less than a mile without exceeding the moderate speed range. The tire pressure is measured in the unit of pounds per square inch (psi). You will find the recommended tire pressure mentioned in this unit.
B. Note the recommended tire pressure.
The recommended tire pressure of the front and rear tires are usually different. You may want to note them down from the user manual to avoid confusion.
C. Check the pressure using a tire pressure gauge.
Now, remove the valve cap from one of the tires. You will hear the hissing sound of the air escaping from the tire. Take the tire pressure gauge and fit it into the valve stem. Press it hard enough so that the hissing sound is not audible anymore. When the gauge displays a reading, note it down. Replace the air valve cap after you remove the gauge.
