Stage 1: Check and record the IP address of the essential switch.
Stage 2: Connect your PC to one of the Ethernet ports of the optional switch.
Stage 3: Go to the online arrangement page of the optional switch.
Stage 4: In the Basic Setup sub-tab, search for IP Address or Local IP Address.
Note: If the IP address is equivalent to the essential switch, change the number in the fourth box to an alternate worth.
Stage 5: For DHCP Server Setting, set DHCP Server to Disabled.
Stage 6: Click Save Settings.
Stage 7: Unplug the link from the PC and interface it to one of the Ethernet ports on the primary switch. Ensure that the essential switch is as yet associated with the modem through the Internet entryway.
associate the link as displayed previously
Stage 8: Reboot the auxiliary switch and after the power light is on, check on the off chance that you can get to the web on your gadget.
Fast tip: If you have a remote switch, you can continue to design its WiFi settings.
Note: A solitary switch set in Bridge mode handicaps the switch's Guest Access highlight. In falling switches, explicitly LAN-LAN association, setting the slave switch to Bridge mode won't permit guests to get to. Be that as it may, Guest Access is as yet permitted assuming the association is LAN to WAN.
Read More@ linksys extender setup https://extender.linksys.com
